Product search:

Through-Coating Thickness Gauge DW-102

Home
Product
Service
Distributor
About Us
Contact

Welcome to
Digiwork
Get better
Instruments

Thickness TestersThickness PartsHardness TestersHardness PartsFlaw DetectorsRoughness TestersRoughness PartsDigital Multimeters

Call 905-669-1663

 

Home > Products > Thickness Tester >

Assembled in Canada - Through Paint Ultrasonic Thickness Tester DW-102

Unit Price: US $799.00

This tester kit is Aseembled in Canada!

The DW-102 is a simple to use, high accuracy, hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and coatings and even to eliminate the thickness of the paint or coating. The DW-102 now offers Through-Coating Thickness Measuring Capability - You can now test painted tanks, pipes, etc., without needing to remove the paint or make corrections for the paint thickness.

DW-102 is manufactured under the strict quality control guidelines established by ISO 9001: 2000 Standards. Its quality is insured by our return policy and full-coverage warranty.

Features:

  • Measuring Method: Ultrasonic pulse echo
  • Measuring Frequency: 5MHz
  • Measuring Range: 0.8 - 250.0 mm in Standard Mode or, 3.0 mm - 23.0 mm in Through-Coating Mode
  • Display in both mm and inch
  • Accuracy: +/- (1%H +/- 0.05) mm
  • Sound velocity range: 1,000 - 9,999m/s
  • Memory capacity: up to 500 test values
  • 4 digit LCD display with advanced backlight
  • Automatic power-off after being idle for 3 minutes
  • Probe contact indicator
  • Low battery indicator
  • Display Resolution: 0.1mm or 0.001 inch
  • Power Supply: 2 X 1.5V AA Standard Batteries
  • Working temperature: -10 C ~ +60 C

Standard Delivery:

    1. Main Processor with Calibration Block (4.0 mm)
    2. Dual Element (echo to echo) Probe, Probe end Diameter: 8.0 mm
    3. Coupling Paste (kind of oil)
    4. Operation Manual in English
    5. Consumer-Type 2 AA Type Alkaline Battery (3 volt)
    6. Foam-Fitted Carrying Case

Optional Accessories:

  • 4mm end-diameter probe with cable (working range: 0.8 mm - 22.0 mm or 0.03 in - 0.85 inch, standard mode only) ($199.00 extra)
  • Communication Kit (RS-232 Cable + Software) between PC and tester unit ($149.00 extra)
  • RS-232 to USB Converter with driver CD ($15.00 extra)
  • 5 Level (4 step) Calibration Block ($79.00 extra)
  • Rubber Protective Case ($49.00 extra)
  • Standard Mode Probe ($99.00 extra)

When use this sample with paint (red color) on it, the gauge can use "Standard" or "Through Coating" modes to test the sample.

When "Standard" (Std) mode is used, the gauge displays a value of 5.4mm, which includes also the thickness of the paint.

After switch to "Through Coating" (Coat) mode, the thickness is 5.0 mm - this is the real thickness of the sample WITHOUT the paint layer.

Picture


© 2016 Digiwork Instruments, All Rights Reserved.